DJG Vantage Point Surveyor Manuel d'instructions

46Replacement Parts ListNOTE: If requested color is not available,similar color will besubstituted.Part Cost Quantity Total CostCrotch Strap/Buckle $4

16Removing Your Child From theChild RestraintPress on release buttonand pull apart. Removechild.31Press red button on buckleto release the buckleplate

1918Choosing LATCH or Vehicle Belts The LATCH SystemAnchor barsVehicle BeltsIf LATCH is not anoption,you will use yourvehicle’s belts. In mostcases yo

2021BuckleTwist vehicle seat belt andlatch plate (or buckle)Latch plateWARNING!Failure to check and adjust the manual beltas described above can resul

22235Rebuckle belt.Lap beltportion should now betight. If not,removelocking clip and repeat allsteps.Forward-Facing Use:22-40 lbs. (10.1-18 kg),34-43”

Connect and tightenharness straps prior toinstalling in vehicle.Place child restraint flushagainst the back of thevehicle seat forward-facing in the b

2627continued on next page.With weakest hand at beltpath,tilt and push thechild restraint forward andback,and from side toside. If the seat belts dono

2829With weakest hand atbelt path,tilt and pushthe child restraintforward and back, andfrom side to side.If theLATCH belts do notloosen,your childrest

3031The top anchorage strap is used for the forward-facingposition only.Most vehicles made after 9/1/99 already have the anchorhardware for a top anch

32 33Belt-Positioning Booster UseLap/Shoulder BeltBelt-Positioning Booster Use:40-100 lbs. (18.1-45.4 kg),43-52” (110.1-132.1 cm), Over 1 year of age.

343545From bottom of seat,locate buckle’s metal clip.Insert buckle’s metal clipup through the shell andpad. From the front,pullbuckle free from shell

Thank you for choosing this car seat,referred tothroughout this manual as a child restraint.The DJGfamily is committed to creating a child restraint w

37WARNING!Check vehicle instructions for moreinformation about air bag/child restraintuse.Do Not Use only the lapbelt when using this seat asa belt-po

39384WARNING!Failure to reattach the buckle and harnesscorrectly, can result in serious injury ordeath.123456Fit loops on harness endsonto the splitte

4041On the bottom of seat,remove the 2 harnessguides and elastic straps.4Replace seat pad by reversing order;replace headrestpad,lay pad on shell, re

42431.If your child restraint is not held securely by the belt:Press down firmly on the child restraint and remove all theslack in the belt.Make sure

4445Warranty Dorel Juvenile Group,Inc.(DJG) warrants this product to theoriginal retail purchaser as follows:This product is warranted against defecti

WARNING!According to accident statistics,childrenare safer when properly restrained in therear seating positions than in the frontseating positions.Ne

4WARNING!Secure the top anchorage strap (tether)provided with this child restraint as specifiedin both the vehicle and child restraintmanufacturer&apo

6Your vehicle’s features may be considerably different thanthose pictured here.Consult your vehicle owner’s manualto help identify your vehicle’s spec

8Child Restraint PartsA. AdjustableHeadrestB. Shoulder Belt Guide C. Harness Covers(on select models)D. Harness Retainer E. Buckle PlateF. Buckle G. H

10Choosing Restraint and PositionYour child’s height,weight and age determine how yourchild restraint should be placed in the vehicle and whichrestrai

125Place the child’s bottomand back flat against thechild restraint.This willincrease comfort andallow the harness toproperly tighten.13Harness Guide6

1415Push each buckle plateinto buckle until you heara “click”. Remember toalways pull up on harnessstraps to make sure buckleis locked tightly.241Posi